High-temperature resistant laser displacement sensor
Contact Info
- ,
- 王先生
- 18910132037
- 1322188373@qq.com
FTZ - Water-cooled Laser Displacement Sensor
1. Product Introduction:
The water-cooled laser displacement sensor uses a water circulation system to create a suitable working environment for sensors in special environments (high temperature, low temperature). The working temperature range of the sensor is -50℃～+200℃. There are a water inlet and a water outlet on the sensor, and you only need to connect circulating water to the sensor during operation.
2. Application Scenarios
1. Reflect mirrors are used to measure the distance of various objects;
2. Optical filters can measure high-temperature measured objects;
3. Explosion-proof boxes can be used in explosion-proof environments;
4. Swing motors can be used for 2D contour measurement.
3. Performance Indicators
1. Optical parameters
Laser characteristics: Red laser diode.
Wavelength: 620nm～650nm.
Laser class: Class 2.
Spot type: Point or line.
Output power: Less than 1 milliwatt.
2. Electrical parameters
Working voltage: 5～24V.
Current: Less than 170 milliamps.
Output formats: Digital quantities RS232, RS485 or RS422, analog quantities 0～5V, 0～10V or 4～20mA.
Resolution: 1mm or 0.1mm.
Accuracy: 1mm.
3. Mechanical parameters
Shell material: Special dust-proof aluminum alloy coating or plastic spraying.
Window: Glass window.
Wiring method: Aviation plug or reserved 1m cable.
4. Environmental parameters
Protection level: Waterproof and dustproof, IP67 rating, in accordance with IEC529 standard.
Storage temperature: -30℃～+80℃.
4. Technical Specifications
1. Measuring range: 0.2～200m (customized);
2. Accuracy: 1mm;
3. Resolution: 1mm/0.1mm;
4. Sampling frequency: 2Hz～10Hz;
5. Working temperature: -50℃～+200℃
6. Storage temperature: -30℃～+80℃
7. Working voltage: DC 5V～24V
8. Power consumption: 1W
9. Output formats: RS232, RS485, TTL, 0～5V, 0～10V, 4～20mA, NPN
10. Spot diameter:10mm@50m
5. Maintenance and Care
1. Clean and keep dry.
2. Blow off the dust on the mirror surface.
3. Do not touch the lens with your fingers.
4. Only use clean soft cloth for wiping. If necessary, you can use pure alcohol or water-wetted cloth for wiping.
5. If you accidentally get the instrument wet, do not expose it to the sun, but let it air dry.
6. Turn off the power if not in use for a long time to avoid affecting the service life.
| Electronic Components & Supplies/Sensors/Displacement Sensors | |
